Editor: inkmaxhk Clicks: 383 Edited on: 6/13/2008 9:28:09 AM

1) Is there any indication that the ink tanks are low/empty? Usually there will be error light(s) on the printer operators panel, or an error message on the computer while printing. 

2) Are you using ink made by the manufacturer for the printer you are using? Non-manufacturer ink is usually cheaper but some of them don't work as well and may cause service issues. Buy from a reputable, local company if purchasing non-manufacturer ink.

3) If you use a power strip to turn everything off when you are finished for the day make sure you turn the printer off first at the printer operators panel-Not doing so may prevent the printhead from 'homing' at its proper rest position, which will then allow the printhead nozzles to dry/clog. 

4) Have you run the printer cleaning cycle?-This is usually done from the printer operators panel or the printer properties/utilities application on your computer (consult your users manual). 

5) Is the printer 'media thickness' control in the proper position for the media you are printing on?-If the control is in the wrong position (example: printing on paper & the control is set to 'envelope") you may experience light/faded print. 

6) If printing photos, make sure you are using the MANUFACTURERS photo paper.-The chemical match between the manufacturers ink and the photo paper is very exact, and using non-manufacturers photo paper or non-manufacturers ink will affect photo print quality.

From ibec-inc.com/tips.html

<<Previous:

PAPER FEED PROBLEMS/JAMS-Check the following:

How ink cartridges work

:Next>>

::adCenter::